AQUATEC 8851 BOOSTER PUMP 24VAC 8851-2J03-B421 SWITCH TRANS

Description YOU WILL RECEIVE:   ONE (1) NEW AQUATEC 8851 SERIES RO BOOSTER PUMP WITH 3/8″ JG INSERTS PART NUMBER 8851-2J03-B421 INPUT/OUTPUT 3/8″ QUICK CONNECT 24 VAC   ONE (1) NEW 8800 TRANSFORMER 115V PART NUMBER: TACS 114-48   ONE (1) NEW AQUATEC PRESSURE SWITCH FOR 6800 AND 8800 BOOSTER PUMPS 3/8″ QUICK CONNECTS PART NUMBER: PSW 340   MADE IN THE USA   BETTER PUMPS BETTER LIVING   PUMP TYPICAL APPLICATIONS: Water Treatment/RO Carbonation Systems Misting Systems Alternative Energy/Solar Medical Labwater Laser Cooling Systems Fuel Cells USE AND BENEFITS: This pump is usually used to boost water supply pressure to a Reverse Osmosis water system. If your water supply pressure is below 40psi, you should add this pump to your RO system. This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi). This pump is suitable for RO systems that use a 100GPD to 200GPD membrane. For RO systems, an increase in input pressure means an increase in water production and water purity. RO systems will run more efficient, with less waste water. Since it uses a pressure switch and solenoid valve to turn on/off the water input, it can turn on and turn off more accurately than the mechanical auto shut-off valve. For large water containers or an open water tank, you can use a float switch or level switch to control the operation of the pump. Aquatec’s original product, and still the “global standard” in booster pump technology, providing reliable inlet pressure for efficient membrane utilization. These pumps are capable of continuous duty and are effective for recirculation based applications as well. They are ideally suited to work with hydro-pneumatic storage systems but are compatible with most hydraulic shut-off valves also. These pumps are commonly used with one or more of Aquatec’s flow control components including: pressure switches (PSW Series), tank level controllers (TLC Series) or electronic shut-off valves (ESO Series). TRANSFORMER Aquatec’s transformers are both current and temperature protected for additional safety protection. Aquatec pump-transformer combinations are designed to operate at maximum efficiency under a wide range of voltage conditions without overheating or overloading. This can save the end-user thousands of kilowatt hours per year compared to less efficient pumps. Features: New Aquatec replacement tranformer for 8800 series booster pumps Designed and manufactured by Aquatec to ensure compatibility and proper operation Standard 2-Prong Plug OEM Part Specifications: Input Voltage: 115-120 VAC Output Voltage Max: 24 VAC Cord Length: 6 Feet Overload Protection: Thermal Fuse SWITCH quatec’s pressure and Vacuum Switches (PSW and VSW Series) provide a full range of in-line pressure sensing electrical switches. These switches, typically mounted near a hydropneumatic holding tank, automatically control the system pump and/or solenoid valve as required. They can also be used to enable hydraulic shut-off valves to operate reliably and positively. Aquatec’s Pressure and Vacuum Switches are normally closed and can be pre-set at various shut-off pressures. If necessary, they can be adapted to operate as normally open switches through minor modifications to the wire terminal connector. The PSW/VSW Series also includes a modular connector for plug-and-play integration with Aquatec’s other system components. Features: Electronically shuts off booster pump if feed water is interrupted Compact and inexpensive High Reliability 100% factory tested Specifications: Port Size: 3/8” Pressure: 40PSI Voltage: 250 VAC