250mm Airflow Hard Treated Wheel Single Section

Polish Up • Airflow Polishing Wheels 250mm Airflow Hard Treated Wheel Single Section Tackle heavy cutting and metal polishing prep with the 250mm Airflow Hard Treated Wheel Single Section. Designed to run cooler than conventional mops, this hard treated airflow wheel is ideal for cutting work on aluminium and other metal surfaces after sanding, helping prepare the surface for the next polishing stages. 250mm Diameter 16mm Centre Hole Heavy Cutting Wheel Runs Cooler Built for Heavy Cutting and Surface Preparation 250mm Airflow Hard Treated Wheel Single Section is a practical choice for metal polishers who need a reliable cutting wheel for early-stage polishing work. Used after abrasive sanding, this airflow wheel helps remove sanding haze and prepare the surface for further refinement with polishing compounds and softer buffing wheels. Its treated folded construction is designed to let air circulate through the wheel while you work, helping reduce heat build-up that can damage some substrates and making it especially useful when working on aluminium and other heat-sensitive metal surfaces. Ideal for Heavy Cutting Designed for heavy cut work after abrasive preparation, helping refine dull metal surfaces before later polishing stages. Runs Cooler Than Conventional Mops The unique airflow folding allows air to circulate through the wheel, helping reduce heat build-up during polishing. Good for Aluminium The product page specifically notes it is good for aluminium and can also be used on other metal surfaces. Fits Common Machines With a 16mm centre hole, it is designed to suit many polisher/sander, barrel polisher and bench polisher setups with matching spindle sizes. Key Product Features This treated airflow polishing wheel is designed to help bridge the gap between abrasive sanding and later polishing and finishing steps. ([polishup.com.au](https://polishup.com.au/product/250mm-airflow-hard-treated-wheel-single-section/)) Wheel Size 250mm diameter with a 16mm centre hole and a single section width of approximately 13–18mm. Best Stage of Use Best used for heavy cutting after using abrasives to around 800–1200 grit, or even lower grit where needed. Recommended With Designed to be used with cutting compounds for effective metal surface preparation. Mounting Note The live page says the wheel should be secured using Polish Up flanges. Best For Heavy cutting after abrasive sanding Preparing aluminium for polishing Refining dull metal surfaces before later buffing stages Use on barrel polishers, bench polishers and compatible polishers/sanders Metal polishing systems that require cooler-running treated airflow wheels 1. Sand the Surface Prepare the metal using abrasives to around 800–1200 grit, or lower grit if heavier cut work is required. 2. Fit the Wheel Securely Mount the wheel on a compatible machine with the correct spindle size and secure it using suitable flanges. 3. Use With Cutting Compound Apply an appropriate cutting compound and work the surface to remove sanding haze and start developing the finish. 4. Move to Finer Stages After cutting, switch to less aggressive wheels and finishing compounds to refine the shine. Product Specifications Product Name 250mm Airflow Hard Treated Wheel Single Section Brand Polish Up SKU YANW-250 Wheel Size 250mm x 16mm centre hole Section Width Single section, approx. 13–18mm width Recommended Use Heavy cutting with cutting compounds after abrasive preparation Suitable Machines Most compatible polisher/sander, barrel polisher and bench polisher setups with the same spindle size Buy a 250mm Airflow Treated Buffing Wheel Online in Australia If you are looking for a reliable 250mm airflow treated buffing wheel for early-stage metal polishing, this single section hard treated airflow wheel is a strong option for heavy cutting and surface preparation. Designed for use with cutting compounds, it is especially useful after abrasive sanding when the metal surface is still dull and needs further refinement before final polishing. The cooler-running airflow design also makes it well suited to aluminium and other metal surfaces where heat build-up can become a problem. For customers searching for a dependable airflow polishing wheel in Australia, this Polish Up wheel offers the size, treated firmness and airflow performance needed for demanding cutting work. Order Your 250mm Airflow Hard Treated Wheel Today Get cooler-running heavy cut performance for aluminium and metal polishing with this hard treated airflow wheel from Polish Up. Cut • Cool • Prepare • Polish Show More Show Less